| No. | Description | |
|---|
| 1 | 90° branch piece | |
| 2 | A 2 Cover net 1/2 216 x 456 mm | |
| 3 | A 320 support frame, Loading components for PLW 86 large-capacity laboratory dishwasher | |
| 4 | A 845/3 Injector nozzle | |
| 5 | Accessories for Miele laboratory washers and disinfectors | |
| 6 | Adapter for using the APFD 210 basket in dishwashers from the ProfiLine PFD 10x series | |
| 7 | ADP 86, module with external booster pump | |
| 8 | Air purifier AirControl PAC | |
| 9 | APLW 152 basket spray arm (1) Loading components for SlimLine PLW 7111 | |
| 10 | APLW 928 RFK FS 60 retrofit kit | |
| 11 | Aqua Purificator PG 8595 | |
| 12 | Aqua-Soft-System PG 8597 pendulum softeners | |
| 13 | Base RP1150 rollable 1150 mm | |
| 14 | Base UG 30-60 / 60-85 Stainless steel, screwed, 300x600x600mm, for PG 8583/PG 8593 | |
| 15 | Base UG 30-90/60-85 Stainless steel, screwed, 300x900x600mm | |
| 16 | Base UG 30-90/70-85 Stainless steel, screwed, 300x900x700mm | |
| 17 | Basket APFD 210 | |
| 18 | basket coupling | |
| 19 | Basket for optimum mounting of injector modules or inserts APLW 106 | |
| 20 | Baskets and carriages for Miele laboratory washers and disinfectors | |
| 21 | branch piece 3/4 Z | |
| 22 | Cable 15 m for printer PRT100 or for PC-Connection | |
| 23 | Canister key | |
| 24 | Caster | |
| 25 | Cleaning Detergent ProCare Lab 10 AP | |
| 26 | Cleaning Detergent ProCare Lab 10 AT | |
| 27 | Cleaning Detergent ProCare Lab 10 MA | |
| 28 | Cleaning detergent ProCare Lab 11 AP | |
| 29 | Cleaning detergent ProCare Lab 11 MA | |
| 30 | Coarse filter for Miele dishwasher PG8583 CD | |
| 31 | Collecting tray DTD 2 | |
| 32 | ConductivityMeter CM / 1 for measuring the conductance and display for the cartridge change | |
| 33 | Conversion kit for second cartridge UfZ/1 | |
| 34 | Cover A 5 | |
| 35 | Cover plate ADB for base frame 1x600x600mm | |
| 36 | Cover spray nozzle C054005 10PZ | |
| 37 | DE-CS7-85/1 lid for glass door 90cm | |
| 38 | Demineralization cartridge VE P 2800/1 for laboratory dishwasher PLW 86x3 | |
| 39 | Dosing cabinet PG 8596, AE DOS 835 x 300 x 600 mm (HxWxD), 2 pull-out shelves | |
| 40 | Dosing cabinet PG 8596, AW DOS 835 x 300 x 600 mm (HxWxD) | |
| 41 | Dosing module DOS K 85 comfort for laboratory washer PLW 86x3 | |
| 42 | Dosing module DOS K 85/1 comfort for laboratory washer PLW 86x3 | |
| 43 | Dosing system DS10 10 liter canister | |
| 44 | Drain pump DP | |
| 45 | DV1 DIN51 Drain Cock | |
| 46 | E 353 Locking device for nozzle 4.0 x 160 mm | |
| 47 | Electric drying 1150 mm DU1150RV Devices air supply through the room | |
| 48 | filter | |
| 49 | Flat sieve E 319/3 for coarse dirt | |
| 50 | Flat sieve E 319/4 | |
| 51 | Ground consolidation BBF-80 for UG 70-60/80 | |
| 52 | Height-adjustable basket APLW 107 for optimum pick-up of inserts | |
| 53 | HEPA filter | |
| 54 | HEPA filter | |
| 55 | Hex nut M5 | |
| 56 | Injector nozzle A 840 | |
| 57 | Injector nozzle A 840/2 pack of 10 | |
| 58 | Injector nozzle A 840/2 pack of 5 | |
| 59 | Injector nozzle A 840/3 pack of 20 | |
| 60 | Injector nozzle A 841 | |
| 61 | Injector nozzle A 841/3 pack of 20 | |
| 62 | Injector nozzle A 842 | |
| 63 | Injector nozzle A 842/1 | |
| 64 | Injector nozzle A 842/2 pack of 10 | |
| 65 | Injector nozzle A 842/3 pack of 20 | |
| 66 | Injector nozzle A 843 | |
| 67 | Injector nozzle A 843/1 | |
| 68 | Injector nozzle A 843/2 pack of 10 | |
| 69 | Injector nozzle A 843/3 pack of 20 | |
| 70 | Injector nozzle A 844 | |
| 71 | Injector nozzle A 844/1 | |
| 72 | Injector nozzle A 844/2 pack of 10 | |
| 73 | Injector nozzle A 844/3 pack of 20 | |
| 74 | Injector nozzle A 845 Dm. 2,5 mm x length 125 mm | |
| 75 | Injector nozzle A 845/2 Dm. 2.5 mm x length 125 mm pack of 10 | |
| 76 | Injector nozzle A 846 | |
| 77 | Injector nozzle A 847 | |
| 78 | Injector nozzle A 848 | |
| 79 | Injector nozzle E 351, 4.0x160 mm screwable, with E 353 (Arretierung) combinable | |
| 80 | Injector nozzle E 352, 6.0 x 220 mm, screwable | |
| 81 | Injector nozzle E 470 with holder for 2, 5 x 90 mm, screwable | |
| 82 | Injector nozzle for butyrometer | |
| 83 | Injector nozzle ID 110, 2.5 x 110 mm | |
| 84 | Injector nozzle ID 140, 4 x 140 mm | |
| 85 | Injector nozzle ID 160, 4 x 160 mm | |
| 86 | Injector nozzle ID 180, 4x180 mm with plastic support | |
| 87 | Injector nozzle ID 200, 6 x 200 mm | |
| 88 | Injector nozzle ID 220, 6 x 220 mm | |
| 89 | Injector nozzle ID 240, 6 x 240 mm | |
| 90 | Injector nozzle ID 90, 2.5 x 90 mm | |
| 91 | Injector nozzle set APLW 870 | |
| 92 | Injector nozzles A 841/1 pack of 5 | |
| 93 | Injector nozzles A 841/2 pack of 10 | |
| 94 | Injector unit 1/1, E 350 with 33 spray jets/arresting device | |
| 95 | Insert 1/1, E 118 for e.g. 38 petri dishes 100 mm diameter | |
| 96 | Insert 1/2 E 963 with 33 holding rods for beakers to 250ml | |
| 97 | Insert 1/2 E 965 with 15 holding rods for beakers 250-600ml | |
| 98 | Insert 1/2 for slides | |
| 99 | Insert 1/2, E 402 for 44 watch glasses/glass panes 80 - 125 mm diameter | |
| 100 | Insert 1/2, E 403 for 105 glass plates 50-60 mm D H=35, W=200, D=445 mm, 36 struts | |
| 101 | Insert 1/4 Container, E 149-06 for 80 test tubes up to 105 mm | |
| 102 | Insert A 11/2, cleaning of wash ware 7 x 7 mm, upper and lower basket for upper or lower basket | |
| 103 | Insert A 321 | |
| 104 | Insert AK 12/1 | |
| 105 | Insert E 494 for microtiterplates | |
| 106 | Insert E969, basket model | |
| 107 | Inserts 1/1, E 136 for e.g. 56 petri half dishes 100 mm diam. | |
| 108 | Inserts for Miele Laboratory Washers and Disinfectors | |
| 109 | key set A838 | |
| 110 | Laboratory washer PLW 8604 | |
| 111 | Laboratory washer PLW 8617 | |
| 112 | Laboratory washer PLW 8636 | |
| 113 | Laboratory washer PLW 8683 under-counter model | |
| 114 | Laboratory washer PLW 8683, Freestanding unit | |
| 115 | Laboratory washer PLW 8693 under-counter model | |
| 116 | Lid 1/2 A 19 for insert E 969 | |
| 117 | Lid A 13 for inserts E 103-105/139 | |
| 118 | Lid A 14/1 | |
| 119 | Lid DE-CS6-85 stainless steel | |
| 120 | Locking device E 353 for nozzle 4x1 mm, height adjustable for injector nozzle E351 | |
| 121 | Locking device E 354 for nozzle 6x1 mm | |
| 122 | Lower cabinet UG 70-60 / 80 With base trough, h = 700mm | |
| 123 | Micro-fine filter | |
| 124 | Microfine filter | |
| 125 | Modul A 613 (only applicable in series PLW 86XX) | |
| 126 | Module 3x6, A301/4 unloaded | |
| 127 | Module A 612 | |
| 128 | Module A 620 | |
| 129 | Module A 621 | |
| 130 | Module/Injector A 313 | |
| 131 | Module/laboratory glass 2x4, A 300/2 Easy Load unloaded | |
| 132 | Module/Laboratory glass 4x8, A 302/2 57mmx60mm, stainless steel | |
| 133 | Module/Viscosimeter A 312 | |
| 134 | Modules for Miele laboratory washers and disinfectors | |
| 135 | Network cable, length 5 m for connection with a practice network (type 7) | |
| 136 | Neutralising agent ProCare Lab 30 C | |
| 137 | Neutralising agent ProCare Lab 30 P | |
| 138 | Paper roll APH 591 for printer PRT 110, width 76 mm, pack of 5 | |
| 139 | ProCare Lab 10 AO, 5 l UN 1719, 8, II, (E) | |
| 140 | ProCare Shine 10 A, 0 l UN 3266, 8, II (E) | |
| 141 | ProCare Shine 40 GC, 5 l Rinse aid, liquid concentrate UN 1814,8, II, (E) | |
| 142 | ProCare Shine 40, 5 l | |
| 143 | ProCare Universal 70 | |
| 144 | Protocol printer PRT110 | |
| 145 | Quick coupling SK/1 for laboratory dishwasher PLW 86x3 pack of 2 | |
| 146 | Reactivation salt ProCare Lab Universal 61 | |
| 147 | relay | |
| 148 | Ribbon APH 592 black, for printer PRT 110 | |
| 149 | Salt jar | |
| 150 | Screw E 362 tread M8x16 | |
| 151 | Segosoft Miele Edit additional license | |
| 152 | Sieve | |
| 153 | Sieve | |
| 154 | SlimLine laboratory dishwasher with electric heating, hot air drying drain pump, condenser, Softening PLW 7111 [S-1012] | |
| 155 | SlimLine Laboratory washer PLW 7111 | |
| 156 | SlimLine Laboratory washer PLW 7111, MOVE ready | |
| 157 | Spray arm V010 | |
| 158 | Steam condenser SC | |
| 159 | support DRM4 55X55 | |
| 160 | Top 1/1, E 137 for e.g. 56 petri dishes 100 dia. | |
| 161 | Transport trolley TT 86 | |
| 162 | Under-counter dishwasher PFD 101 U | |
| 163 | Underlay frame A 12/2 | |
| 164 | Wagon A 503 | |
