Product overview - Dicsa Webshop

Entries 1 to 200. Total of 683 entries found.

No.	Description
1	3-finger clamp clamping width 0-125mm steel/nickel-plated
2	Abrasive paper coarse 60 #08901
3	Accessories for transport containers
4	Anchor stirrer 500x70 mm stainless steel, shaft diameter 8 mm
5	Anchor stirrer 650x90 mm stainless steel, shaft diameter 10 mm
6	Anchor stirrer 800x140 mm stainless steel, shaft diameter 10 mm
7	Angle pipe joint 90° for 3 single pipes
8	Apothecary spoon 280 mm stainless steel 18/10, spoon 50 x 85 mm
9	Ashing tray 19x55 mm 45 ml, made of nickel 99.5%
10	Beaker and flask clamp, 18/10 steel
11	Beaker tongs type 1, 250 mm 18/8, for d. 55-100 mm with silicone hose cover
12	Beaker tongs type 2, 250 mm 18/8, for d. 25-100 mm with silicone hose cover
13	Beaker tongs, 18/10 steel
14	Beaker tongs, with rubber-sleeved jaws
15	Beakers, stainless steel, with rim
16	Beakers, stainless steel, with rim and handle
17	Beakers, stainless steel, with rim and spout
18	Beakers, stainless steel, with rim, spout and handle
19	Bin with lid 130 x 102 mm lid with handle, stackable, 18/10-steel
20	Bosshead
21	Bosshead 16.5 mm, type 4 angle 90+180°, 18/10 steel
22	Bosshead Jumbo diam. 20+30 mm duralaluminium, angle 90°
23	Bosshead TECHNO 90°, 5-22 mm
24	Bosshead three angel, duraluminium d=19-23
25	Bosshead, 18/10 steel, angle 90°
26	Bosshead, Aluminium, angle 90° and 180°
27	Bossheads, aluminium, angle 90°
28	Bossheads, aluminium, angle 90°
29	Bossheads, aluminium, angle 90°
30	Bossheads, malleable cast iron, chromed
31	Bowl 130 ml, 40x80 mm round bottom, stainless steel
32	Bowl 18/10 1000 ml D 160mm
33	Bowl 18/10 670ml D 140mm
34	Bowl 2006 ml, 100x200 mm round bottom, stainless steel
35	Bowl 250 ml, 50x100 mm round bottom, stainless steel
36	Bowl 450 ml, 60x120 mm round bottom, stainless steel
37	Bowl 50 ml, 30x60 mm round bottom, stainless steel
38	Bowl pliers type 2, 250mm 18/8 steel, e-polishing
39	Bowl tongs type 1, 250 mm 18/8 steel E-polished
40	Bowl with 2 handles 18/8 steel
41	Brush for flasks
42	Brush for test tubes
43	Brushes for bottles
44	Brushes for tubes
45	Bucket cap. 6 ltrs st.steel, graduated, with handle
46	Buckets, 18/10 steel, with base ring
47	Buckets, 18/10 steel, without base ring
48	Bunsen burner for all gas air regulator, with stopcock, pilot flame, 0.5-3 KW
49	Bunsen burner for natural gas DIN 30665, air regulation, max. 1300°C, 1.53 KW
50	Bunsen burner for natural gas with stopcock, air regulation, pilot flame, max. 1300°C, 1.53 KW
51	Bunsen burner for propane DIN 30665, air regulation, max. 1300°C, 2.36 KW
52	Bunsen burner for propane with stopcock, air regulation, pilot flame, max. 1300°C, 2.36 KW
53	Bunsen burner, Ms-Ni
54	Burette and piston clamp with bosshead, 16,5mm
55	Burette and piston clamp with chrome-plated shaft 130 mm
56	Burette and thermometer clamp
57	Burette and thermometer clamp
58	Burette clamp with bole 130 mm, 4-20mm
59	Burette clamp with bosshead 13,5 mm
60	Burette clamps 130mm
61	Burette clamps 18/8 steel
62	Burette clamps f.2 burettes 44426
63	Burette clamps, steel.
64	Burette holders, aluminium
65	Burette stand DUPLEX with 18/10-rod 600x10mm 2 plates black+white Ø 105mm
66	Burettes-and test tubes clamp with bush 13,5 mm, PVC coated
67	Cement double spatula type 2 150 mm, stainless
68	Cement double spatula type 3 150 mm, stainless
69	Cement spatula Typ 1 150 mm, stainless
70	Centering holder for bottom blow-off valve
71	Centrifugal stirrer 300x90/15 mm 2 flexible blades, stainless steel shaft diameter 10 mm
72	Centrifugal stirrer 300x90/15 mm 2 flexible blades, stainless steel shaft diameter 8 mm
73	Centrifugal stirrer 400x90/15 mm 2 flexible blades, stainless steel shaft diameter 8 mm
74	Centrifugal stirrer 400x90/15 mm 2 flexible blades, stainless steel shaft diameter 10 mm
75	Centrifugal stirrer 500x90/15 mm 2 flexible blades, stainless steel shaft diameter 10 mm
76	Centrifugal stirrer 500x90/15 mm 2 flexible blades, stainless steel shaft diameter 8 mm
77	Centrifugal stirrer 500x90/15 mm 2 flexible blades, stainless steel shaft diameter 8 mm
78	Centrifugal stirrer 650x90/15 mm 2 flexible blades, stainless steel shaft diameter 10 mm
79	Chain clamp, steel/zincked
80	Chain clamps 150 mm "kaufmann", 18/10 steel
81	Chemical scoop 1.00 ltr. 320 mm, 18/10-steel
82	Chemical scoop 290 mm ALU, 400 ml
83	Chemical scoop 310 mm ALU, 480 ml
84	Chemical scoop 350 mm ALU, 900 ml
85	Chemical scoop 400 mm ALU, 1600 ml
86	Chemical scoop 85 mm ALU, 10 ml
87	Chemical scoops, 18/10 steel
88	Chemical scoops, aluminium
89	Chemical scoops, stainless steel 1.4301, with welded handle
90	Chemical spoon 180 mm Nickel, 40x28 mm
91	Chemical spoon 180mm titanium
92	Chemical spoon, 120 mm nickel 99,5%
93	Chemical spoon, 150 mm nickel 99,5%
94	Chemical spoon, 210 mm nickel 99,5%
95	Cleaning/rinsing table 2 basins m. base plate/shelf left # 21806
96	Closing plug
97	Collecting tray stainless steel
98	Condenser clamp, malleable cast iron, chromed
99	Connection rod 360° Ø 12 mm
100	Connector 90° for 2 single tubes 26.9 mm 1 end open
101	Containers, aluminium
102	Cork borer set with ejector
103	Cork borer sharpener, stainless
104	Cover glass forceps, 105 mm PTFE coating, curved
105	Cover glass forceps, stainless 18/10 steel
106	Cross bosshead Set 2 x bosshead Laboral # B08600121 + 1 x rod 360° # B08599126
107	Cross bosshead, right-angle format, Aluminum alloy
108	Cross connector 26,9 mm 2 channels
109	Cross sleeve 2 - 16 mm 18/10-steel, angle 90+180°
110	Cross sleeve 8 - 27 mm 18/10-steel, angle 90+180°
111	Cross socket 2 - 16 mm LABORAL, angle 90+180
112	Cross socket 8 - 27 mm Labomeca, Alubronce
113	Crucible 30 ml, 18/10-steel Type 2 - 1.0 mm thick, without cap
114	Crucible lid 35 mm, 18/10 steel for 25 ml crucible
115	Crucible lid 40 mm, 18/10 steel for 30 ml crucible
116	Crucible lids 50 mm, 18/10 steel, for 70 ml crucibles
117	Crucible tongs
118	Crucible tongs, 18/10 steel, PTFE-coated
119	Crucible tongs, heavy execution, 18/10 steel
120	Crucible tongs, stainless steel, with plastic handle
121	Crucible-support ring 18/8-steel
122	Crucibles 25 ml, 18/10 steel, type 2, 1.0 mm thick, without lid
123	Crucibles 70 ml, 18/10 steel, type 2, 1.0 mm thick, without lid
124	Crucibles, nickel
125	Cutting board, PE
126	Diamant pencil 150 mm with octahedron point and wooden handle
127	Diamant pencil 150 mm with octahedron point made of metal
128	Disposable alu dishes 125 ml 96 mm Ø, pack of 100
129	Disposable alu dishes 28 ml 64 mm Ø, pack of 100
130	Disposable alu dishs 110 ml 99 mm Ø, pack of 100
131	Dissecting needles for needle holder Kolle, 18/10 stainless, eye
132	Dissecting needles for needle holder Kolle, 18/10 stainless, lancet
133	Dissecting needles for needle holder Kolle, 18/10 stainless, needle
134	Dissecting Needles, 18/10 stainless
135	Dissecting Set, 8 pieces, stainless steel
136	Double bosshead 16.5 mm, type 3 angle 90°, 18/10 steel
137	Double bosshead 16.5 mm, type 4 angle 90°, malleable cast iron
138	Double cross bosshead
139	Double Cross Bosshead 16,5 mm type 3, thread 8, 18/10-steel b
140	Double Cross Bosshead 16.5 mm, type 1 angle 90°, ALU
141	Double Cross Bosshead 16.5 mm, type 3 angle 90+180°, 18/10 steel
142	Double Cross Bosshead 16.5 mm, type 3 angle 90+180°, 18/10 steel
143	Double Cross Bosshead 16.5 mm, type 4 angle 90+180°, malleable cast iron
144	Double cross bosshead, 18/10 steel, angles 90° and 180°
145	Double cross bosshead, Aluminium
146	Double cross bosshead, stainless steel 18/10
147	Double Cross Bossheads 16.5 mm, type 3 aluminium alloy
148	Double ended spatula 210x11mm, PTFE-coated
149	Double micro spatula 150x3 mm straight, PTFE coated
150	Double micro spatula 150x5 mm straight, PTFE coated
151	Double micro spatula 185x4 mm straight, PTFE coated
152	Double micro spatula 210x6 mm straight, PTFE coated
153	Double micro-spatulas 100x5 mm curved, 18/10 steel
154	Double micro-spatulas 130x3 mm curved, 18/10 steel
155	Double micro-spatulas 150x5 mm curved, 18/10 steel
156	Double micro-spatulas 210x5 mm curved, 18/10 steel
157	Double micrp-spatula 185x5 mm curved, 18/10 steel
158	Double socket 12-13 x 12-13 mm 18/10-steel, angle 90°, type 3
159	Double socket 12-13 x 16 mm LABORAL, angle 90°, type 3
160	Double socket 16 x 16 mm LABORAL, angle 90°, type 3
161	Double spatula 150x18 mm flat shape, nickel 99.5%
162	Double spatula 150x9 mm straight, PTFE coated
163	Double spatula 185x9 mm straight, PTFE coated
164	Double spatula 210mm Titan
165	Double spatula 210x5,5 mm 18/10-Stahl
166	Double spatula 210x7 mm 1 Seite conical, PTFE coated
167	Double spatula 210x7 mm 1 side conical, 18/10 steel
168	Double spatula 400x25 mm 18/10 steel, substantial execution
169	Double spatula 90x15 mm flat form, nickel 99.5
170	double spatulas flexible 180 mm 48 x 10 mm
171	double spatulas flexible 210 mm 48 x 10 mm
172	double spatulas flexible 250 mm 50 x 10 mm
173	double spatulas flexible 250 mm 60 x 20 mm
174	double spatulas flexible 300 mm 65 x 22 mm
175	Double spatulas, 18/10 stainless steel
176	Double-ended spatula 180 mm, PTFE coated type 1 standard, spoon 25 x 8 mm, single end spoon
177	Double-ended spatula 210 mm, PTFE coated type 1 standard, spoon 25 x 12 mm, single end spoon
178	Double-ended spatula 230 mm, PTFE coated type 1 standard, spoon 25 x 12 mm, single end spoon
179	Double-ended spatula, 160x9 mm one side conical, 18/10 steel
180	Double-ended spatulas, 18/10 steel
181	Double-ended spatulas, 18/10 steel, bent
182	Double-ended spatulas, Nickel
183	Drain tubes for stainless steel jerrycans
184	Draining rack 420x160x610 mm PA coated, with drip-pan, for 65 tubes and flasks
185	Draining racks, PE-coated
186	Dressing jar 180 x 180 mm stockable, 18/10 steel
187	Dressing jar with lid 100 ml 60 x 60 mm, 18/8 steel
188	Dressing jar with lid 1200 ml 120 x 120 mm, 18/8 steel
189	Dressing jar with lid 130 x 124 mm lid with handle, stockable, 18/10 steel
190	Dressing jar with lid 165 x 124 mm lid with handle, stockable, 18/10 steel
191	Dressing jar with lid 2500 ml 150 x 150 mm, 18/8 steel
192	Dressing jar with lid 400 ml 85 x 85 mm, 18/8 steel
193	Dressing jar with lid 6000 ml 200 x 200 mm, 18/8 steel
194	Dressing jar with lid 700 ml 100 x 100 mm, 18/8 steel
195	Dressing jar with lid 80 x 102 mm lid with handle, stockable, 18/10 steel
196	Dressing scissors, stainless steel, straight
197	Elbow connector 90° for 2 tubes temper casting, Ø 26,9 mm
198	Electrical lift LIFT 240 Workspace 240x240mm, height max. 300mm, end stop adjustable
199	Evaporatind dish Nickel 30 ml height 25 mm, diam. 50 mm
200	Evaporating basins, 18/10 steel