| No. | Description | |
|---|
| 1 | Adapter HV-DN 25 - Olive D 11 | |
| 2 | Adapters cup/cone Cup S 40, NS-K 29/32 | |
| 3 | Adapters socket/ball NS-H 29/32, Ball S 40 | |
| 4 | Adapters socket/cone NS-H 14/23, NS-K 29/32 | |
| 5 | Adapters socket/cone NS-H 29/32, NS-K 14/23 | |
| 6 | Bubble counter according to Hettstett NS 14/23 | |
| 7 | Bubble counter, style A NS 29/32, heigth 140mm | |
| 8 | Claisen adapter with silver coated high vacuum jacket, with NS 14/23 and NS-K 29/32 | |
| 9 | Claisen links | |
| 10 | Coil condensers NS-H 29/32, NS-K 29/32 | |
| 11 | Cold trap 100 ml NS-K 29/32, NS-H 29/32 | |
| 12 | Cold Trap, Dewar-vessel, 0,036 m², HFN25, HFN25, HFN50, height 320mm, Boro3.3/FKM | |
| 13 | Concial ground joint hollow plugs with flat bottom and safety groove, NS 14/23 | |
| 14 | Condensers, Dimroth NS-H 14/23, NS-K 14/23 | |
| 15 | Condensers, Dimroth NS-H 29/32, NS-K 29/32 | |
| 16 | Condensers, Liebig | |
| 17 | Condensers, Liebig NS-H 29/32, NS-K 29/32 | |
| 18 | Conical ground core NS 29/32 | |
| 19 | Conical ground joint cone NS 45/40 | |
| 20 | Conical ground joint socket NS 29/32 | |
| 21 | Conical ground joint socket NS 45/40 | |
| 22 | Connection cable M8 ST.0°/M 12 BU. 90°PUR 4X0.25 SW UL/CSA+DRAG CHAIN 3M | |
| 23 | Destillation flask 100 ml with three necks/NS socket MH NS 29/32, 2xSH 20° curved NS 14/23 | |
| 24 | Destillation flask 1000 ml with three necks/NS socket MH NS 29/32, 2xSH 20° curved NS 14/23 | |
| 25 | Destillation flask 250 ml with three necks/NS socket | |
| 26 | Destillation flask 500 ml with three necks/NS socket MH NS 29/32, 2xSH 20° curved NS 14/23 | |
| 27 | Dosing funnel 100 ml woth silver-coated high vacuum insulating jacket, tempering jacket, NS-K 19/26, NS-H 14/23 | |
| 28 | Dosing funnel 1000 ml NS-H+K 29/32, with tempering jacket, glass | |
| 29 | Dosing funnel 250 ml NS H+K 29/32, with tempering jacket, glass | |
| 30 | Dosing funnel 250 ml with Mariotte'schem tube, NS-K 29/32, NS-H 14/23 | |
| 31 | Dosing funnel 250 ml with Mariotte'schem tube, tempering jacket, NS-K 19/26, NS-H 14/23 | |
| 32 | Dosing funnel 50 ml with Mariotte'schem tube, NS-K 29/32, NS-H 14/23 | |
| 33 | Dosing funnel 500 ml NS -H+K 29/32, with tempering jacket, GLas | |
| 34 | Dosing funnel 500 ml with Mariotte'schem tube, NS-K 29/32, NS-H 19/26 | |
| 35 | Dosing funnel for solids 10 ml 175 mm, NS-K 14/23 | |
| 36 | Dosing funnel for solids 25 ml 195 mm, NS-K 14/23 | |
| 37 | Dosing funnel for solids 50 ml 275 mm, NS-K 29/32 | |
| 38 | Dropping funnel 100 ml, 14/23 for operation under normal ressure | |
| 39 | Dropping funnel 250 ml, 29/32 for operation under normal ressure | |
| 40 | Dropping funnel 50 ml, 14/23 for operation under normal ressure | |
| 41 | Drying tube Dr. Wünsch NS-K 29/32 | |
| 42 | Flask 10 ml, pear shaped with NS socket 14/23 | |
| 43 | Flask 10 ml, round bottom with NS socket 14/23 | |
| 44 | Flask 100 ml, distilling with two necks/NS socket MH NS 14/23, SH 20° curved NS 14/23 | |
| 45 | Flask 100 ml, pear shaped with NS socket 14/23 | |
| 46 | Flask 100 ml, round bottom with NS socket 14/23 | |
| 47 | Flask 100 ml, round bottom with NS socket 29/32 | |
| 48 | Flask 1000 ml, round bottom with NS socket 29/32 | |
| 49 | Flask 2000 ml, round bottom with NS socket 29/32 | |
| 50 | Flask 25 ml, distilling with two necks/NS socket MH NS 14/23, SH 20° curved NS 14/23 | |
| 51 | Flask 25 ml, pear shaped with NS socket 14/23 | |
| 52 | Flask 25 ml, round bottom with NS socket 14/23 | |
| 53 | Flask 250 ml, round bottom with NS socket 29/32 | |
| 54 | Flask 5 ml, pear shaped with NS socket 14/23 | |
| 55 | Flask 5 ml, round bottom with NS socket 14/23 | |
| 56 | Flask 50 ml, distilling with two necks/NS socket MH NS 14/23, SH 20° curved NS 14/23 | |
| 57 | Flask 50 ml, pear shaped with NS socket 14/23 | |
| 58 | Flask 50 ml, round bottom with NS socket 14/23 | |
| 59 | Flask 50 ml, round bottom with NS socket 29/32 | |
| 60 | Flask 500 ml, round bottom with NS socket 29/32 | |
| 61 | Flat sealing for tube olive FD 5.50x12.50x1.50 FKM | |
| 62 | Glas body for High-vacuum spindle valve SPV03 strengthen, angled version, nominal diameter 3 | |
| 63 | High-vacuum spindle valve SPV03 strengthen, angled version, nominal diameter 3 | |
| 64 | High-vacuum spindle valve SPV06 strengthen, angled version, nominal diameter 6 | |
| 65 | High-vacuum spindle valve SPV10 strengthen, angled version, | |
| 66 | Holding spring 20 mm | |
| 67 | Holding spring 30 mm | |
| 68 | Holding spring 40 mm | |
| 69 | Holding spring 50 mm | |
| 70 | Hose connector, PF system with hose adaptor 16 mm o.D. Borosilicate glass 3.3 | |
| 71 | Hose connector, PF system with hose adaptor 26 mm o.D. Borosilicate glass 3.3 | |
| 72 | Hose connector, PF system with hose adaptor 8 mm o.D. Borosilicate glass 3.3 | |
| 73 | Inner part for pressure relief/check valve | |
| 74 | Jacketed coil condensers NS-H 29/32, NS-K 29/32 | |
| 75 | Joint collet Rotulex® 41/25 | |
| 76 | KPG-stirrer 500 ml with interchangeable PTFE-wiper blade shaft-dia. 16 mm # R010/100/XXXX-S02 | |
| 77 | KPG-stirrer seals NS 29/32 sealed, shaft Ø 10mm | |
| 78 | Laboratory flat flanges with groove | |
| 79 | Liebig bridge with NS-K 19/26, NS-K 14/23, GL 14 ATTENTION: Thermometer ground joint NS 14/23 | |
| 80 | Manifold Distributor, standard design 1 x NS-H 14,23, 4 x NS-K 14/23 | |
| 81 | Metal safety hooks for NS 19 | |
| 82 | Micro Soxhlet extractor | |
| 83 | Micro stirring shaft Duran 50, shaft dia. 6 mm | |
| 84 | Micro-Micro-Soxhlet Extractor Volume 5 ml, complete (N2023) | |
| 85 | Micro-stirrer 100 ml shaft-dia. 6 mm # R006/100/XXXX-S03 | |
| 86 | Multiple adapters, three necks 4 x NS 29/32 | |
| 87 | NORMAG CUeasy | |
| 88 | Over pressure/backlash valve after Stutz 0,3 bar with feather bonded ball cut closure, with sideways discharde port, NS-K 29/32 | |
| 89 | Over pressure/backlash valve after Stutz 0,3 bar with feather bonded ball cut closure, GL18 thread with sideways discharde port | |
| 90 | Overpressure valve, NSC24/40 GL018, 0,1 barg, Boro3.3, Special version Art.-No. VOVNSC2440GL18 | |
| 91 | Pipe section DN 100, 400 mm length, PF system borosilicate glass 3.3 | |
| 92 | Pressure relief spring for 0.1 bar PNS0001881 / 4279139293 | |
| 93 | Pressure valve after Bösherz for pure gases | |
| 94 | Quartz Immersion Heater SAA 09299E | |
| 95 | Reducer, symmetrical, DN25 to DN 15, 100mm, PF system, Borosilicate glass 3.3 | |
| 96 | Resistance themometer transmitter, straight, 8 mm, length 150 mm, KF, Boro3.3 | |
| 97 | Reversing frit 25 ml, NS-K 14/23 with single-way stopcock and outlet pipe 165x11x20mm # ARFS00025/1423/23/X | |
| 98 | Ring sealing DN15, type PF glass-glass | |
| 99 | Safety / overpressure valves, with spring loaded spherical ground joint seal | |
| 100 | Safety / overpressure valves, with spring loaded spherical ground joint seal, with stopcock | |
| 101 | Safety wash bottle 200 ml Por.1, height 250 mm, GL 14 | |
| 102 | Schlenkline Basic complete package cons. of each 1xLSG1300004, LSG0054902, LSG1320023, GSG0101408, LSG1340032, LSG1340031, | |
| 103 | Schlenkline Basic with 4 ports olive D9 and two way stopcocks 4NS | |
| 104 | Schlenklinie Pro 4 connections, complete, Boro 3.3 ASLP4H09P | |
| 105 | Sealing ring, FKM externally centred, DN 25 | |
| 106 | Separating funnel 5000 ml NS-H 45/40 | |
| 107 | Separating funnels 100 ml | |
| 108 | Separating funnels 1000 ml | |
| 109 | Separating funnels 250 ml | |
| 110 | Separating funnels 50 ml | |
| 111 | Separating funnels 500 ml | |
| 112 | Single way pump stopcock / glass key 3 NS, 2.5 mm, 14.5 mm | |
| 113 | Single way stopcocks with glass key and bending tube arms, NS 14.5. bore 2,5mm | |
| 114 | small flange bolting made of ALU anodised, DN 20-25 # FVB 01012HV 03/ALU | |
| 115 | Thread-tubing connector curved, GL 14 | |
| 116 | Three-necked round bottom flask 500 ml MH NS 29/32, 2xSH parallel NS 29/32 | |
| 117 | Three-way valve with glass needle complete, 8 NS, 15 x 2.5 mm | |
| 118 | Two-way pump stopcock / glass key 3 NS, 2.5 mm, 14.5 mm | |
| 119 | Two-way pump stopcock / glass key 4 NS, 4 mm, 18.8 mm | |
| 120 | Two-way pump stopcock / glass key 6 NS, 6 mm, 21.5 mm | |
| 121 | Two-way stopcock with bending tube arms NS 18.8, hole 2.5 mm | |
| 122 | Valve, angle, glass part, bending tube, 03NS pipe 8x1,5 mm, Boro3.3 | |
| 123 | Valve, angle, glass part, bending tube, 06NS pipe 10x1,5 mm, Boro3.3 | |
| 124 | Valve, corner, high vacuum, bending tube, 03NS Tube 8x1.5 mm, Boro3.3/PTFE | |
| 125 | Valve, corner, high vacuum, bending tube, 06NS Tube 10x1.5 mm, Boro3.3/PTFE | |
| 126 | Valve, valve plunger with handle high vacuum, 03NS, PTFE | |
| 127 | Valve, valve plunger with handle high vacuum, 06NS, PTFE | |
| 128 | Vigreux column with conical ground joint, DN 15, NS-K 14/23, NS-H 14/23, 300 mm, 200 mm | |