Entries 1 to 200. Total of 1949 entries found.
No.Description 
1***see item 9224042*** Stand plate 210c130mm, green thread M10, one foot adjustable 
2***see item 9224043*** Tripod plate 250x160mm, thread M10 Steel painted green 
32-way-stopcock, with NS-PTFE-plug with screw thread retaining nut, hole 4mm, NS 18,8/ 10x110 mm 
4A?-case Heating Mantles with Controller, 230 V, capacity 50 ml 
5Absorption vessel with glass tubes and copper spirals filled (item) 
6Absorption vessel with glass tubes filled, (single item) 
7Adapter for 0.2 ml reaction vessels for angled rotor for CF-10, "CFTA1 pack of 12 
8Adapter for crucibles, I-Ø 41 mm stem o.d. 10 mm, for crucible: 30 ml, rubber sleeve: o.d. 41 mm 
9Adapter for plug no. 8 (for MultiVac distributor) 
10Adapter for SF funnel, 47 mm, for WaterVac 100/200, MultiVac 300/600 
11Adapter for WaterVac 100, made of stainless steel for Millipore disposable plastic funnels Microfilter MIACFD101 / MIACFD201 
12Adapter, 2xGL 25 with cap and silicone seal 
13Adapter, expansion adapter cone ST 10/19, socket ST 14/23 
14Adapter, expansion adapter cone ST 19/26, socket ST 29/32 
15Adapter, expansion adapter cone ST 24/29, socket ST 29/32 
16Adapter, reduction adapter cone ST 19/26, socket ST 29/32, acc. to DIN 12257 
17Adapter, reduction adapter cone ST 34/35, socket ST 29/32 
18Adapter, reduction adapter cone ST 45/40, socket ST 29/32, acc. to DIN 12257 
19Adjustable hanging bar spinner flask 1000ml middle neck-cap 110mm, side necks-cap 45mm 
20Adjustable hanging bar spinner flask 500ml middle neck-cap 45mm, side necks-cap 18mm 
21Air outlet for Rocker 300/400/410/430 
22air suction tube w. PTFE needle valve stopcock 
23Air-condenser 500 mm cone NS 29/32 
24Allihn chiller coat length 250mm cone and socket NS 29/32, DIN 12581 
25Allihn chiller coat length 400mm cone and socket NS 29/32, DIN 12581 
26Analytical Balance WBA-220 0,1mg...220g, Ø 80mm, with windscreen 
27Analytical funnel, Ø80 mm boro, clear glass, stem length 150 mm, stem O.Ø 9 mm 
28Anchor stirrer PL137, 2 blades, stainless steel Blade width 160 mm, diameter 10 mm, length 1000 mm 
29Angled high vaccum stopcock "Witaflo" with PTFE-needle valve, length: 225 mm, bore: 10 mm, DURAN tubing 
30Angled high vacuum stopcock "Witaflo" red, with PTFE-needle valve, overtwist safety device, bore: 12 mm, 225 x 15 mmm 
31Angled high vacuum stopcock "Witaflo" with PTFE-needle valve, length: 210 mm, bore: 3 mm, DURAN tubing 
32Angled high vacuum stopcock "Witaflo" with PTFE-needle valve, red, overtwist safety device, bore: 6 mm, 210 x 10 mm,  
33Angled ultra high vacuum valve SVT 26x130mm bore: 20 mm, with valve-bellow, V4A-steel, FKM-O-sing seal 
34Anti-foaming spacer with core ST 14/23 and ferrule ST 29/32, flask 250 ml 
35Antifoam spacer core and ferrule ST 29/32, with piston 100 ml 
36Antifoam spacer with core and ferrule ST 29/32, flask 250 ml 
37Antifoam spacer with core ST 14.5/23 and ferrule ST 29, from 100 ml round bottom flask 
38Aparatus of determination acc.to Unger, cpl. for determination of ethereous oils 
39Apothecary spatula 250 mm blade: 155 x 22 mm, wooden handle, stainless steel 
40Apparatus for arsenic determination acc. to DAB, complete, borosilicate glass 
41Apparatus for arsenic determination complete, borosilicate glass using silver- diethyl-dithiocarbamat 
42Apparatus for determination of CO² concentration 
43Apparatus for determination of nitrogen after Parnas-Wagner, macro, complete Kjeldahl flask with 250 ml drip-catcher 
44Apparatus for determination of sulphur dioxide 
45Apparatus for the determination of essenial oils acc. to DAB, complete, borosilicate glass 
46Apparatus for the determination of Ethanol, complete, borosilicate glass 
47Aquaria 250x180x220mm rough ground rim Soda glass 
48Areometer ASTM, 118H 1,350-1,400:0,0005, specific gravity 
49Aspiration bottle 500 ml neck NS 19/26, plug hole 4mm, tubus NS 19/26, DIN 12037, borosilicate glass 
50Aspirator bottle 1000 ml, NS 19/26, Ø 110 mm Height 200 mm, DURAN® glass, NS stopcock 4 mm, NS stopper 
51Aspirator bottle 10000 ml neck with GL 45, with GL 32 tubulature Borosilicate glass 
52Aspirator bottles 10000 ml, borosilicate glass with ST-stopcock + stopper, height: 398 mm, Ø 234 bore of plug 8 mm, neck 
53ASTM Centrifuge tube 100 ml cylindrical with concial bottom, graduated, with brands at 50 and 100 ml 
54ASTM Centrifuge tube 100 ml cylindrical with conical lower part ASTM D 91 and ASTM 96,8, blue graduated 
55ASTM-centrifuge tubes, pear shape, 100 ml, white graduated, with cylindrical bottom, ASTM D. 96 made from borosilicate 3.3 
56Atomiser 1000ml, PE 
57Atomizer for chromatography with Erlenmeyer flasks 100ml NS 19/26, with rubber ball 
58Autoanalyzer 2.0 ml, PS pack of 1000 
59Autoclave bags 255 x 400 mm PP, 3 L, pack of 500 
60Autoclave bags 600x780 mm PP, 32 L pack of 500 
61Autom. burettes, Pellet 100:0.2 ml, DIN-B w. ST-stopcock, w. lateral needle valve, 2l flask Schellbach, without aspirator bulb, 
62Autom. burettes, Pellet 100:0.2 ml, DIN-B w. ST-stopcock, w. lateral stopcock, ST-glass-plug Schellbach, 2 bottle, without aspi 
63Autom. pipette attachment 10 ml cone NS 29/32 
64Autom. pipette attachment 3 ml cone NS 29/32 
65Autom. pipette attachment 30 ml cone NS 29/32 
66Autom. pipette attachment 40 ml cone NS 29/32 
67Autom.pipette attachment GL45 100ml 
68Autom.pipette attachment GL45 25ml 
69Autom.pipette attachment GL45 40ml 
70Autom.pipette attachment GL45 50ml 
71Automatic pipette 100 ml acc. to Friedrichs, automatic Zero point adjustment 
72Automatic pipette 4 ml cone ST 29/32 
73Automatic pipette attachment GL45 10ml 
74Automatic pipette attachment GL45 30ml 
75Automatic pipettes 30 ml, with bottle cone 29/32 
76Bact. pipettes 1,1ml DIN AS, reinforced tip, colour code 2x green 
77Bact. pipettes 2,2ml DIN AS, tightened tip 
78Bacteriological petri dishes 55mm PS, w. cover, sterile, pack of 15 
79Bacteriological pipette 11 ml, DIN-AS marks each 1,0 tempered extremely, wide delivery tips 
80Baffle flask "Biogen" 200 ml three baffles, straight neck for metal caps, Ø 79mm, height 136mm, neck Ø  
81Baffle flask "Biogen" 3000 ml three baffles, straight neck for metal caps, Ø 187mm, height 310mm, neck Ø 
82Baffle flask "Biogen" 50 ml three baffles, straight neck for metal caps, Ø 51mm, height 90mm, neck Ø 38 
83Baffle flask "Biogen" 5000 ml three baffles, straight neck for metal caps, Ø 220mm, height 365mm, neck Ø 
84Bag closures plastic flash binder red,length 100 MM,width 50-180 MM, pack of 100 
85Bags 200x300 mm 0,05 mm pcs., transparent, LDPD, pack of 100 
86Bags 250x400 mm 0,05 mm pcs., transparent, LDPD, pack of 100 
87Ball Mill Drive BML-2, for two ball mills, digital feedback controller, timer: 99 hr. / 59 min. / 59 sec., programmable, LCD Di 
88Ball Mill Drive BML-6, for six ball mills, digital feedback controller, timer: 99 hr. / 59 min. / 59 sec., programmable, LCD Di 
89Barrel Funnel 310mm Stem 18.5mm, HDPE 
90Barrel Funnel 420mm Stem 30.6mm, HDPE 
91Basket, 120x120x120 mm stainless steel 
92Beaker 100 ml, N.F. borosilikat-glass 3.3 with division and spout 
93Beaker 1000 ml, low form with graduation, with spout, boro 3.3, pack of 10 
94beaker 1000 ml, N.F. Borosilikat-glass, with division and spout, pack of 10 
95Beaker 1000 ml, n.F. DURAN® glass, with graduation, A.Ø 105 mm, height 145 mm, pack of 10 
96Beaker 10000 ml, N.F. borosilicate glass 3.3 with graduation and spout 
97Beaker 1000ml, Ø 95mm, height 180mm high form, with handle, division, and spout, borosilicate glass 
98Beaker 150 ml, N.F. borosilikat-glass 3.3 with division and spout 
99beaker 2000 ml, N.F. Borosilikat-glass with division and spout 
100beaker 2000 ml, N.F. Borosilikat-glass, with division 
101Beaker 2000 ml, Ø 120 mm, height 240mm high form, with handle, division, and spout, borosilicate glass 
102beaker 25 ml, N.F. Borosilikat-glass 3.3 with division and spout 
103beaker 250 ml, N.F. Borosilikat-glass 3.3 with division and spout 
104Beaker 250 ml, tall form, without spout, outer Ø: 61 mm, height: 117 mm, with graduation, made of DURAN® tubing, ISO 
105Beaker 400 ml, H.F. Borosilikat-glass 3.3 with division and spout Ø 70mm, height 130mm 
106beaker 400 ml, N.F. Borosilikat-glass 3.3 with division and spout 
107Beaker 5000 ml, n.F., DURAN® glass with graduation and spout A.Ø 170 mm, height 270 mm 
108Beaker 500ml, Ø 80mm, height 150mm high form, with handle, division, and spout, borosilicate glass 
109beaker 600 ml, N.F. Borosilikat-glass 3.3 with division and spout 
110Beaker tongs,length 300 mm, ceramics 
111Beaker-Set MIDI, cons. of 2x400ml, 4x600ml, 4x1000ml, Borosilikat-glass 3.3 
112Beaker-Set MIDI, cons. of 2x50ml, 2x100ml, 2x150ml, 4x250ml, Borosilikat-glass 3.3 
113Beakers,boro-glass,low form,cap.150 ml, with graduation and spout, with Witeg Logo 
114Bent piece of wire for putting supports of glass into staining tray 
115Biostill glass part, alone 3 l 
116Biostill quartz heater for 4 litre unit 230 V, 2200 W 
117Block extraction tong BLE101 
118Block thermostat H-20, digital control, 230 V, 50/60 Hz without single block 
119Blockthermostate HB-48-Set Digital Controller, Temp.range +5...150°C, 230 V, 50/60 Hz 
120Blow-out graduated pipette cl.AS 10ml:0.01, holding time 3s, color code orange 
121Blow-out graduated pipette cl.AS 1ml:0.01 calibratable, holding time 3s, color code red, 
122Blow-out graduated pipette cl.AS 1ml:0.01, calibratable, holding time 3s, color code yellow 
123Blow-out graduated pipette cl.AS 5ml:0.05, calibratable, holding time 3s, color code red, 
124Blow-out graduated pipette cl.AS 5ml:0.1 calibratable, holding time 3s, color code blue 
125Blow-out graduated pipettes 20 ml:0.01, cl.AS holding time 3s, color code orange pack of 12 
126Blow-out pipette 0,5ml class AS, with ring mark, ISO-Color-Code 2x black 
127Blow-out pipette 10ml cl.AS, one mark, DIFFICIO amber, color code red, acc.DIN EN ISO 648 
128Blow-out pipette 15mL cl.AS, one mark, DIFFICIO amber, color code red, acc.DIN EN ISO 648 
129Blow-out pipette 1ml DIN-AS, one mark, ISO-COLOR-CODE calibrateable 
130Blow-out pipette 20ml cl.AS, calibratable, holding time 3 sec. ISO-Color-Code, with ring mark 
131Blow-out pipette 25ml cl.AS, calibratable, holding time 3 sec. ISO-Color-Code, with ring mark 
132Blow-out pipette 2ml cl.AS, one mark, DIFFICIO amber, color code orange, acc.DIN EN ISO 648 
133Blow-out pipette 5ml Kl.AS, one brand, KB, DIFFICIO brown, Color code white, n.DIN EN ISO 648 
134Blow-out pipettes, Class AS, 0,5:0,01ml waiting time 5 sec., color-code 2x yellow 
135BMC6 Soundproof Cabinet, for BML-6 
136Boiling capillary Insertion length 200 mm, NS 14/23 
137Bottle top dispenser LABMAX Airless adjusting range 0,3 - 2,5 ml, division 0,05 ml, with venting 
138Bottle top dispenser LABMAX Airless adjusting range 1.0 - 10.0 ml, division 0.20 ml, with venting 
139Bottle top dispenser Labmax eco regulation 0.25 - 2.50 ml, division 0.05 ml, GL 32 
140Bottle top dispenser LABMAX eco regulation 1,0 - 10,0 ml, division 0,20 ml, GL 32 
141Bottle top dispenser LABMAX eco regulation 10,0 - 100,0 ml, division 2 ml, GL 45 
142Bottle top dispenser LABMAX eco regulation 2,5 - 25,0 ml, division 0,50 ml, GL 45 
143Bottle top dispenser LABMAX eco regulation 5,0 - 50,0 ml, division 1,00 ml, GL 45 
144bottle, PE-LD, wide-mouthed, 100 ml, GL 32, round, transparent, with screw-cap 
145Bottle- und flask brush 45 mm Ø 
146Bottle-top dispenser LABMAX Airless HF Thread GL45, 1 - 10ml 
147Bottle-top dispenser LABMAX Airless HF Thread GL45, 2,5 - 25ml 
148Bottletop-MINISPENSOR 1000+2000µl green 
149Brush set with 10 different sizes Ø of 10 - 80 mm, pack of 10 
150Brush, beaker, wooden handle, Ø - 90 mm 
151BSB bottles 300ml, NS 19/26 DURAN, with funnel, without stopper 
152Büchner funnel, PP, 40 ml, filter Ø 42,5 mm, hole Ø 1,2 mm, stem length 47 mm, 
153Bucket 10 ltr., PE, white graduated 
154Buechner funnel, PP, filter-Ø 160 mm height 280 mm, holes-Ø 3,0 mm 
155Buechner funnel, PP, filter-Ø 240 mm height 350 mm, holes-Ø 3,0 mm 
156Buechner funnel, PP, filter-Ø 70 mm height 145 mm, holes-Ø 1.5 mm 
157Bulb / teats for pipettes, approx. 2 ml, rubber transparent 
158Bulb pipette 10 ml, 2 marks DIN-AS, KB-certified 
159Bunsen burner for natural gas with air regulation 
160Burette 10 ml:0.02 class B, side valve tap, PTFE spindle, Schellbach, pack of 2 
161Burette 100 ml class B, stright arbor cock, Schellbach strips 
162Burette 100:0,2 ml, blue graduated class AS, with valve PTFE stopcock conformity certified, Schellbach 
163Burette 25 ml class B, straight stop cock, NS glas poult, Schellbach 
164Burette 25 ml:0,05, Kl-AS straight stopcock, PTFE-tap, clear glass, conformity certificate 
165Burette 25ml:0.05, DIN-AS side valve, PTFE needle valve with Schellbach strip, conformity certified 
166Burette 5 ml, DIN-AS straight tap, PTFE chick, blue graduated with Schellbach 
167Burette 50 ml, DIN-AS straight stopcock, PTFE-tap, clear glass, conformity certificate 
168Burette 50:0,1 ml, blue graduated class AS, with valve PTFE stopcock, conformity certified, Schellbach 
169Burette 5ml, DIN-AS straight tap, PTFE chick, brown glass, 5ml calibratable 
170Burette acc.Pellet 10:0,02ml amber glass, NS tap, 2 ltr. storage bottle 
171Burette acc.Pellet 25:0,05ml amber glass, NS tap, 2 ltr. storage bottle 
172Burette clamp nickel-plated With sleeve and handle for 1 burette 
173Burette Digital TITREX 2000 0-50 
174Burette holder for 2 burettes, span 0-13mm with sleeve, with roll holder, 170 mm, made of aluminium 
175Burette holder, PP, 1 compartment with clamp, for stands Ø 8-14mm 
176Burette, Daffert, DIN-B, 25 ml:0,05 two-way-stopcock, clear glass 
177Burettes 50:0,1 ml, DIN-AS straight needle valve, PTFE stopcock clear glass, KB, pack of 2 
178Calcimeter acc. to Dietrich-Frühling for determination of calcium carbonate (CaCO3) 
179Calliper, digital LCD 0...150mm, tolerance 0.01 mm, with slide feed and depth gauge 
180Calliper, digital LCD 0...150mm, tolerance 0.01 mm, with slide feed and depth gauge, with DAkkS calibration certificate 
181Calliper, digital LCD 0...300mm, tolerance 0.01 mm, with slide feed and depth gauge 
182Canister 10 Ltr., PE with botling, stackable 
183Canister 3000 ml, PE-HD Natural, with screw cap 168x97x252mm, pack of 5 
184Canister 5 Ltr., PE with botling, stackable 
185Capillary tube 1mm lumen 500 mm long, pack of 2 
186Carbon electrode alone, for Water electrolysis unit acc. to Hofmann 
187Cellculture bottles "Biogen" DBGM 250ml center neck screw-cap 80mm, side necks 25mm 
188Centre-neck volumetric flask 25 ml NS 12/21 with NS-PE stopper blue graduated 
189Centrifuge glasses 17 x 112 mm Grad. 15:0.1 ml, edge smooth, AR-glass white graduated, pack of 10 
190Centrifuge jar "Biogen" 15 ml round bottom, non graduated, heavy wall, borosilicate glass 3.3 
191Centrifuge jar "Biogen" 25 ml round bottom, graduated, heavy wall, nominal capacity 20 ml 
192Centrifuge jar 15 ml, 100x16mm sharp bottom, w./o. graduation, heavy wall, without edge 
193Centrifuge jar 80 ml, 100x44mm sharp bottom, w./o. graduation, heavy wall, without edge 
194Centrifuge jars 15 ml round bottom, graduated, strong walls, 
195Centrifuge tube "Biogen" 25 ml round bottom, non grad.,thick wall,with screw cap, 98 mm u.d. 24 mm, nominal volume 20 
196Centrifuge Tube 10 ml round bottom,non grad.,thick wall,with screw cap, 98 mm u.d. 16 mm, 
197Centrifuge tube 100 ml round bottom,non grad.,thick wall,with screw cap, 98 mm u.d. 44 mm, nominal volume 85 ml 
198Centrifuge tube 15 ml 100x16mm, round bottom, strong walls, w/o rim, not graduated 
199Centrifuge tube 15 ml round bottom, graduated, strong walls, with screw-cap 
200Centrifuge tube 50 ml 100x34mm, round bottom, strong walls, w/o rim, not graduated