Entries 1 to 200. Total of 1806 entries found.
No.Description 
1***see item 9224042*** Stand plate 210c130mm, green thread M10, one foot adjustable 
2***see item 9224043*** Tripod plate 250x160mm, thread M10 Steel painted green 
32-way-stopcock, with NS-PTFE-plug with screw thread retaining nut, hole 4mm, NS 18,8/ 10x110 mm 
4A?-case Heating Mantles with Controller, 230 V, capacity 50 ml 
5Absorption vessel with glass tubes and copper spirals filled (item) 
6Absorption vessel with glass tubes filled, (single item) 
7Adapter for 0.2 ml reaction vessels for angled rotor for CF-10, "CFTA1 pack of 12 
8Adapter for crucibles, I-Ø 41 mm stem o.d. 10 mm, for crucible: 30 ml, rubber sleeve: o.d. 41 mm 
9Adapter, 2xGL 25 with cap and silicone seal 
10Adapter, expansion adapter cone ST 10/19, socket ST 14/23 
11Adapter, expansion adapter cone ST 19/26, socket ST 29/32 
12Adapter, expansion adapter cone ST 24/29, socket ST 29/32 
13Adapter, reduction adapter cone ST 19/26, socket ST 29/32, acc. to DIN 12257 
14Adapter, reduction adapter cone ST 34/35, socket ST 29/32 
15Adapter, reduction adapter cone ST 45/40, socket ST 29/32, acc. to DIN 12257 
16Adjustable hanging bar spinner flask 1000ml middle neck-cap 110mm, side necks-cap 45mm 
17Adjustable hanging bar spinner flask 500ml middle neck-cap 45mm, side necks-cap 18mm 
18Air outlet for Rocker 300/400/410/430 
19air suction tube w. PTFE needle valve stopcock 
20Air-condenser 500 mm cone NS 29/32 
21Allihn chiller coat length 250mm cone and socket NS 29/32, DIN 12581 
22Allihn chiller coat length 400mm cone and socket NS 29/32, DIN 12581 
23Analytical Balance WBA-220 0,1mg...220g, Ø 80mm, with windscreen 
24Analytical funnel, Ø80 mm boro, clear glass, stem length 150 mm, stem O.Ø 9 mm 
25Anchor stirrer PL137, 2 blades, stainless steel Blade width 160 mm, diameter 10 mm, length 1000 mm 
26Angled high vaccum stopcock "Witaflo" with PTFE-needle valve, length: 225 mm, bore: 10 mm, DURAN tubing 
27Angled high vacuum stopcock "Witaflo" red, with PTFE-needle valve, overtwist safety device, bore: 12 mm, 225 x 15 mmm 
28Angled high vacuum stopcock "Witaflo" with PTFE-needle valve, length: 210 mm, bore: 3 mm, DURAN tubing 
29Angled high vacuum stopcock "Witaflo" with PTFE-needle valve, red, overtwist safety device, bore: 6 mm, 210 x 10 mm,  
30Antifoam spacer core and ferrule ST 29/32, with piston 100 ml 
31Antifoam spacer with core ST 14.5/23 and ferrule ST 29, from 100 ml round bottom flask 
32Aparatus of determination acc.to Unger, cpl. for determination of ethereous oils 
33Apothecary spatula 250 mm blade: 155 x 22 mm, wooden handle, stainless steel 
34Apparatus for arsenic determination acc. to DAB, complete, borosilicate glass 
35Apparatus for arsenic determination complete, borosilicate glass using silver- diethyl-dithiocarbamat 
36Apparatus for determination of nitrogen after Parnas-Wagner, macro, complete Kjeldahl flask with 250 ml drip-catcher 
37Apparatus for determination of sulphur dioxide 
38Apparatus for the determination of essenial oils acc. to DAB, complete, borosilicate glass 
39Apparatus for the determination of Ethanol, complete, borosilicate glass 
40Aquaria 250x180x220mm rough ground rim Soda glass 
41Areometer ASTM, 118H 1,350-1,400:0,0005, specific gravity 
42Aspiration bottle 500 ml neck NS 19/26, plug hole 4mm, tubus NS 19/26, DIN 12037, borosilicate glass 
43Aspirator bottle 1000 ml, NS 19/26, Ø 110 mm Height 200 mm, DURAN® glass, NS stopcock 4 mm, NS stopper 
44Aspirator bottle 10000 ml neck with GL 45, with GL 32 tubulature Borosilicate glass 
45Aspirator bottles 10000 ml, borosilicate glass with ST-stopcock + stopper, height: 398 mm, Ø 234 bore of plug 8 mm, neck 
46ASTM Centrifuge tube 100 ml cylindrical with concial bottom, graduated, with brands at 50 and 100 ml 
47ASTM Centrifuge tube 100 ml cylindrical with conical lower part ASTM D 91 and ASTM 96,8, blue graduated 
48ASTM-centrifuge tubes, pear shape, 100 ml, white graduated, with cylindrical bottom, ASTM D. 96 made from borosilicate 3.3 
49Atomiser 1000ml, PE 
50Atomizer for chromatography with Erlenmeyer flasks 100ml NS 19/26, with rubber ball 
51Autoanalyzer 2.0 ml, PS pack of 1000 
52Autoclave bags 255 x 400 mm PP, 3 L, pack of 500 
53Autoclave bags 600x780 mm PP, 32 L pack of 500 
54Autom. burettes, Pellet 100:0.2 ml, DIN-B w. ST-stopcock, w. lateral needle valve, 2l flask Schellbach, without aspirator bulb, 
55Autom. burettes, Pellet 100:0.2 ml, DIN-B w. ST-stopcock, w. lateral stopcock, ST-glass-plug Schellbach, 2 bottle, without aspi 
56Autom. pipette attachment 10 ml cone NS 29/32 
57Autom. pipette attachment 3 ml cone NS 29/32 
58Autom. pipette attachment 30 ml cone NS 29/32 
59Autom. pipette attachment 40 ml cone NS 29/32 
60Autom.pipette attachment GL45 100ml 
61Autom.pipette attachment GL45 25ml 
62Autom.pipette attachment GL45 40ml 
63Autom.pipette attachment GL45 50ml 
64Automatic pipette 100 ml acc. to Friedrichs, automatic Zero point adjustment 
65Automatic pipette 4 ml cone ST 29/32 
66Automatic pipette attachment GL45 10ml 
67Automatic pipette attachment GL45 30ml 
68Automatic pipettes 30 ml, with bottle cone 29/32 
69Bact. pipettes 1,1ml DIN AS, reinforced tip, colour code 2x green 
70Bact. pipettes 2,2ml DIN AS, tightened tip 
71Bacteriological petri dishes 55mm PS, w. cover, sterile, pack of 15 
72Bacteriological pipette 11 ml, DIN-AS marks each 1,0 tempered extremely, wide delivery tips 
73Baffle flask "Biogen" 200 ml three baffles, straight neck for metal caps, Ø 79mm, height 136mm, neck Ø  
74Baffle flask "Biogen" 3000 ml three baffles, straight neck for metal caps, Ø 187mm, height 310mm, neck Ø 
75Baffle flask "Biogen" 50 ml three baffles, straight neck for metal caps, Ø 51mm, height 90mm, neck Ø 38 
76Baffle flask "Biogen" 5000 ml three baffles, straight neck for metal caps, Ø 220mm, height 365mm, neck Ø 
77Bag closures plastic flash binder red,length 100 MM,width 50-180 MM, pack of 100 
78Bags 200x300 mm 0,05 mm pcs., transparent, LDPD, pack of 100 
79Bags 250x400 mm 0,05 mm pcs., transparent, LDPD, pack of 100 
80Ball Mill Drive BML-2, for two ball mills, digital feedback controller, timer: 99 hr. / 59 min. / 59 sec., programmable, LCD Di 
81Ball Mill Drive BML-6, for six ball mills, digital feedback controller, timer: 99 hr. / 59 min. / 59 sec., programmable, LCD Di 
82Barrel Funnel 310mm Stem 18.5mm, HDPE 
83Barrel Funnel 420mm Stem 30.6mm, HDPE 
84Basket, 120x120x120 mm stainless steel 
85Beaker 100 ml, N.F. borosilikat-glass 3.3 with division and spout 
86Beaker 1000 ml, low form with graduation, with spout, boro 3.3, pack of 10 
87beaker 1000 ml, N.F. Borosilikat-glass, with division and spout, pack of 10 
88Beaker 1000 ml, n.F. DURAN® glass, with graduation, A.Ø 105 mm, height 145 mm, pack of 10 
89Beaker 10000 ml, N.F. borosilicate glass 3.3 with graduation and spout 
90Beaker 1000ml, Ø 95mm, height 180mm high form, with handle, division, and spout, borosilicate glass 
91Beaker 150 ml, N.F. borosilikat-glass 3.3 with division and spout 
92beaker 2000 ml, N.F. Borosilikat-glass with division and spout 
93beaker 2000 ml, N.F. Borosilikat-glass, with division 
94Beaker 2000 ml, Ø 120 mm, height 240mm high form, with handle, division, and spout, borosilicate glass 
95beaker 25 ml, N.F. Borosilikat-glass 3.3 with division and spout 
96beaker 250 ml, N.F. Borosilikat-glass 3.3 with division and spout 
97Beaker 250 ml, tall form, without spout, outer Ø: 61 mm, height: 117 mm, with graduation, made of DURAN® tubing, ISO 
98Beaker 400 ml, H.F. Borosilikat-glass 3.3 with division and spout Ø 70mm, height 130mm 
99beaker 400 ml, N.F. Borosilikat-glass 3.3 with division and spout 
100Beaker 5000 ml, n.F., DURAN® glass with graduation and spout A.Ø 170 mm, height 270 mm 
101Beaker 500ml, Ø 80mm, height 150mm high form, with handle, division, and spout, borosilicate glass 
102beaker 600 ml, N.F. Borosilikat-glass 3.3 with division and spout 
103Beaker tongs,length 300 mm, ceramics 
104Beaker-Set MIDI, cons. of 2x400ml, 4x600ml, 4x1000ml, Borosilikat-glass 3.3 
105Beaker-Set MIDI, cons. of 2x50ml, 2x100ml, 2x150ml, 4x250ml, Borosilikat-glass 3.3 
106Beakers,boro-glass,low form,cap.150 ml, with graduation and spout, with Witeg Logo 
107Bent piece of wire for putting supports of glass into staining tray 
108Block extraction tong BLE101 
109Blockthermostate HB-48-Set Digital Controller, Temp.range +5...150°C, 230 V, 50/60 Hz 
110Blow-out graduated pipette cl.AS 10ml:0.01, holding time 3s, color code orange 
111Blow-out graduated pipette cl.AS 1ml:0.01 calibratable, holding time 3s, color code red, 
112Blow-out graduated pipette cl.AS 1ml:0.01, calibratable, holding time 3s, color code yellow 
113Blow-out graduated pipette cl.AS 5ml:0.05, calibratable, holding time 3s, color code red, 
114Blow-out graduated pipette cl.AS 5ml:0.1 calibratable, holding time 3s, color code blue 
115Blow-out graduated pipettes 20 ml:0.01, cl.AS holding time 3s, color code orange pack of 12 
116Blow-out pipette 0,5ml class AS, with ring mark, ISO-Color-Code 2x black 
117Blow-out pipette 10ml cl.AS, one mark, DIFFICIO amber, color code red, acc.DIN EN ISO 648 
118Blow-out pipette 15mL cl.AS, one mark, DIFFICIO amber, color code red, acc.DIN EN ISO 648 
119Blow-out pipette 1ml DIN-AS, one mark, ISO-COLOR-CODE calibrateable 
120Blow-out pipette 20ml cl.AS, calibratable, holding time 3 sec. ISO-Color-Code, with ring mark 
121Blow-out pipette 25ml cl.AS, calibratable, holding time 3 sec. ISO-Color-Code, with ring mark 
122Blow-out pipette 2ml cl.AS, one mark, DIFFICIO amber, color code orange, acc.DIN EN ISO 648 
123Blow-out pipette 5ml Kl.AS, one brand, KB, DIFFICIO brown, Color code white, n.DIN EN ISO 648 
124Blow-out pipettes, Class AS, 0,5:0,01ml waiting time 5 sec., color-code 2x yellow 
125BMC6 Soundproof Cabinet, for BML-6 
126Boiling capillary Insertion length 200 mm, NS 14/23 
127Bottle top dispenser LABMAX Airless adjusting range 1.0 - 10.0 ml, division 0.20 ml, with venting 
128Bottle top dispenser Labmax eco regulation 0.25 - 2.50 ml, division 0.05 ml, GL 32 
129Bottle top dispenser LABMAX eco regulation 1,0 - 10,0 ml, division 0,20 ml, GL 32 
130Bottle top dispenser LABMAX eco regulation 10,0 - 100,0 ml, division 2 ml, GL 45 
131Bottle top dispenser LABMAX eco regulation 2,5 - 25,0 ml, division 0,50 ml, GL 45 
132Bottle top dispenser LABMAX eco regulation 5,0 - 50,0 ml, division 1,00 ml, GL 45 
133bottle, PE-LD, wide-mouthed, 100 ml, GL 32, round, transparent, with screw-cap 
134Bottle- und flask brush 45 mm Ø 
135Bottle-top dispenser LABMAX Airless HF Thread GL45, 1 - 10ml 
136Bottle-top dispenser LABMAX Airless HF Thread GL45, 2,5 - 25ml 
137Bottles conical shoulder, 500 ml, narrow neck, ST 24/29, with ST-glass stopper, clear glass, Soda 
138Bottletop-MINISPENSOR 1000+2000µl green 
139Brush set with 10 different sizes Ø of 10 - 80 mm, pack of 10 
140Brush, beaker, wooden handle, Ø - 90 mm 
141BSB bottles 300ml, NS 19/26 DURAN, with funnel, without stopper 
142Büchner funnel, PP, 40 ml, filter Ø 42,5 mm, hole Ø 1,2 mm, stem length 47 mm, 
143Bucket 10 ltr., PE, white graduated 
144Buechner funnel, PP, filter-Ø 160 mm height 280 mm, holes-Ø 3,0 mm 
145Buechner funnel, PP, filter-Ø 240 mm height 350 mm, holes-Ø 3,0 mm 
146Buechner funnel, PP, filter-Ø 70 mm height 145 mm, holes-Ø 1.5 mm 
147Bulb pipette 10 ml, 2 marks DIN-AS, KB-certified 
148Bunsen burner for natural gas with air regulation 
149Burette 10 ml:0.02 class B, side valve tap, PTFE spindle, Schellbach, pack of 2 
150Burette 100 ml class B, stright arbor cock, Schellbach strips 
151Burette 100:0,2 ml, blue graduated class AS, with valve PTFE stopcock conformity certified, Schellbach 
152Burette 25 ml class B, straight stop cock, NS glas poult, Schellbach 
153Burette 25 ml:0,05, Kl-AS straight stopcock, PTFE-tap, clear glass, conformity certificate 
154Burette 25ml:0.05, DIN-AS side valve, PTFE needle valve with Schellbach strip, conformity certified 
155Burette 5 ml, DIN-AS straight tap, PTFE chick, blue graduated with Schellbach 
156Burette 50 ml, DIN-AS straight stopcock, PTFE-tap, clear glass, conformity certificate 
157Burette 50:0,1 ml, blue graduated class AS, with valve PTFE stopcock, conformity certified, Schellbach 
158Burette acc.Pellet 10:0,02ml amber glass, NS tap, 2 ltr. storage bottle 
159Burette acc.Pellet 25:0,05ml amber glass, NS tap, 2 ltr. storage bottle 
160Burette clamp nickel-plated With sleeve and handle for 1 burette 
161Burette Digital TITREX 2000 0-50 
162Burette holder for 2 burettes, span 0-13mm with sleeve, with roll holder, 170 mm, made of aluminium 
163Burette holder, PP, 1 compartment with clamp, for stands Ø 8-14mm 
164Burette, Daffert, DIN-B, 25 ml:0,05 two-way-stopcock, clear glass 
165Burettes 50:0,1 ml, DIN-AS straight needle valve, PTFE stopcock clear glass, KB, pack of 2 
166Calcimeter acc. to Dietrich-Frühling for determination of calcium carbonate (CaCO3) 
167Calliper, digital LCD 0...150mm, tolerance 0.01 mm, with slide feed and depth gauge 
168Calliper, digital LCD 0...150mm, tolerance 0.01 mm, with slide feed and depth gauge, with DAkkS calibration certificate 
169Calliper, digital LCD 0...300mm, tolerance 0.01 mm, with slide feed and depth gauge 
170Canister 10 Ltr., PE with botling, stackable 
171Canister 3000 ml, PE-HD Natural, with screw cap 168x97x252mm, pack of 5 
172Canister 5 Ltr., PE with botling, stackable 
173Carbon electrode alone, for Water electrolysis unit acc. to Hofmann 
174Cellculture bottles "Biogen" DBGM 250ml center neck screw-cap 80mm, side necks 25mm 
175Centre-neck volumetric flask 25 ml NS 12/21 with NS-PE stopper blue graduated 
176Centrifuge glasses 17 x 112 mm Grad. 15:0.1 ml, edge smooth, AR-glass white graduated, pack of 10 
177Centrifuge jar "Biogen" 15 ml round bottom, non graduated, heavy wall, borosilicate glass 3.3 
178Centrifuge jar "Biogen" 25 ml round bottom, graduated, heavy wall, nominal capacity 20 ml 
179Centrifuge jar 15 ml, 100x16mm sharp bottom, w./o. graduation, heavy wall, without edge 
180Centrifuge jar 80 ml, 100x44mm sharp bottom, w./o. graduation, heavy wall, without edge 
181Centrifuge jars 15 ml round bottom, graduated, strong walls, 
182Centrifuge tube "Biogen" 25 ml round bottom, non grad.,thick wall,with screw cap, 98 mm u.d. 24 mm, nominal volume 20 
183Centrifuge Tube 10 ml round bottom,non grad.,thick wall,with screw cap, 98 mm u.d. 16 mm, 
184Centrifuge tube 100 ml round bottom,non grad.,thick wall,with screw cap, 98 mm u.d. 44 mm, nominal volume 85 ml 
185Centrifuge tube 15 ml 100x16mm, round bottom, strong walls, w/o rim, not graduated 
186Centrifuge tube 15 ml round bottom, graduated, strong walls, with screw-cap 
187Centrifuge tube 50 ml 100x34mm, round bottom, strong walls, w/o rim, not graduated 
188Centrifuge Tube 50 ml, GL 32 round bottom, non grad., heavy wall, borosilicate, with heat resistant screw cap and PTFE - liner 
189Centrifuge tube, 80 ml, round bottom, graduated, heavy wall, with screw cap, length 98 mm,o.d. 44mm nominal volume 65 ml 
190Centrifuge tube, with screw cap borosilicate glass, 12 ml, o.d. x length:17x140mm, GL 18, subdivision: 1 ml 
191Centrifuge tube, with screw cap borosilicate glass, 15 ml, o.d. x length: 17 x 140 mm, GL 18, subdivision: 1 ml 
192Centrifuge tube, with screw cap, borosilicate glass, shallow cone bottom, 50 ml, 28 x 140 mm, sub- division 0-10 in 0.5/10-50 i 
193Centrifuge tubes 15 ml, PP with crew-cap, 17x120 mm, conical, graduated, pack of 150 
194Centrifuge tubes 17 x 98 mm without graduation, edge smooth, Lower part conical, soda glass, pack of 100 
195Centrifuge tubes 17x112 mm grad. DIFFICO white, 15:0,1 ml, with rim, AR-glass, pack of 100 
196Centrifuge tubes 50 ml 30 x 115 mm, with stand edge and blue screw cap nonsterile, graduated PP, pack of 250 
197Centrifuge tubes 50 ml, PP 30x115 mm, conical, sterile, blue grad., in bag, pack of 25 
198Centrifuge tubes 50 ml, PP with screw-cap, 30x115 mm, conical, graduated, pack of 25 
199Centrifuge tubes 50 ml, PP with srew-cap, 30x115 mm, conical, graduated, pack of 25 
200Centrifuge tubes, 10 ml, conical bottom, graduated, strong walls, with screw-cap